360 Excavator Training Courses

first-aid-training-courses-chelmsford-essex-1

  • 360 Excavator Training Courses

    360 Excavator Training Courses

360 Excavator Training Courses Chelmsford

To provide thorough theory and practical training in the role of the Excavator operator, enabling candidates to competently and safely carry out the role and pass the CPCS Theory and Practical tests.

Some of the things you will learn include:

  • Name and explain the purpose of the principle components, the basic construction, controls and terminology
  • Conform to manufacturer’s requirements as per the operator’s handbook, and relevant regulations/legislation
  • Undertake all pre-use checks on the transporter and prime mover
  • Configure and set for site and public highway travel, loaded and unloaded
  • Travel over rough undulating ground, substantial inclines and level services
  • Manoeuvre in confined spaces
  • Explain actions required for hazards, underground and overhead services
  • Excavate differing types of excavation in various types of ground
  • Place materials into transporting vehicles and hoppers
  • Grade, spread and level ground and materials
  • Attached and remove buckets
  • Lift, move and place a variety of slung loads
  • Travel with slung loads
  • Carry out plant shut down and securing procedures
  • Explain the loading/unloading procedures for plant transportation

Frequently asked questions about fire marshal training London courses

What is the difference between fire marshals and fire wardens?

There is no difference between fire marshals and fire wardens. They carry out the same role. However on building sites – Fire marshals carry out safety checks and fire wardens carry out site evacuations.

Managers can pick the title role themselves. We can change your certificates to say Fire Marshal Course or Fire Warden Course. Our fire marshal and fire warden courses are accredited and as an approved fire training centre we can change your in house course to include plans, fire drills and live sessions.

How often do you hold open fire marshal training courses London and fire warden training courses London?

Our open courses are held every month. Most courses are held in the morning from 10 a.m. to 1 p.m. In addition, we sometimes run a mirror course from 10.30 a.m. to 1.30 p.m. if we have extra persons requiring this course.

We advise that persons wanting to book staff on this course do so as early as possible. These courses are very popular and some companies hold block bookings each month for their staff. Therefore this can sometimes make other spaces limited.

How many persons can attend a fire marshal courses London session?

If your staff attend one of our open courses we limit the numbers taking part in the practical session to twenty persons. Therefore, if we have more than twenty persons on the course we carry out two practical sessions. Any person wishing to fight a small fire using our rig can do so. We use water, foam and CO2 extinguishers.

If you decide to have an in house course, you may place any number of persons on your training session. If you select a live fire training session to add to your course, we limit the numbers on this session so that we can keep every one safe. You may place any number of persons on the classroom sessions, so this course can represent great value for money. If you need more than twenty persons to have hands on extinguisher training on your fire marshal course, we can either carry out two separate fire marshal training sessions or have a double practical session.
Can you run courses in the evening?

Yes we can run twilight and evening sessions as well as morning and also afternoon courses. We can run a live fire training session in the evening but we do need good lighting conditions so that we keep everyone safe. Our team recently undertook an evening session for sixty persons. We provide individual certificates for up to twenty persons on a course. We can also print your attendance list for those requiring greater numbers trained.

you work for the fire service?

No we do not work for the fire service. We used to run fire training courses for the fire service safety partnership. We no longer operate with us in this way. However, we have carried out fire training for fire service personnel to use evacuation equipment.

All of our team have previously worked for the fire service as commercial fire trainers and as operational officers. Other roles included emergency planning officers, fire safety inspectors and other safety roles. These skills allow us to run courses that meet fire service standards.

you provide online fire marshal training courses?

Yes we do provide on line fire training courses. We currently offer three types of course: Fire marshal for office staff, general fire marshal course, staff fire training for offices and also general staff fire training.

In addition, we can provide secure online fire training websites for your place of work. This means that only your staff can see the course content. The courses are about fire safety issues in your building. Nearly all other providers offer general courses that are not about your workplace!

You can also ask about buying places on fire marshal training London course and have access to our online fire training courses. The normal price for online fire training is £20+vat. However, your fire marshal can have one years access to our online fire training package. So your fire marshals can check any details they may be unsure off during the year.
Do you discuss high rise buildings?

Continue Reading No Comments

HGV Banksman Training Courses

first-aid-training-courses-chelmsford-essex-1

  • HGV Banksman Training Courses

    HGV Banksman Training Courses

HGV Banksman Training Courses

HGV Vehicle Banksman training courses are delivered at your companies own site, and we require you to supply the yard area and vehicle to perform manoeuvres.

This course qualifies you to bank any category of vehicle up to and including LGV/HGV articulated lorry. Bank vehicles on any site in the UK with permission of the person responsible for site H&S. It does not qualify you to instruct or supervise others who have not received formal training as a vehicle banksman.

Some of the things you will learn include:

  • Conducting a manoeuvre
  • Legal Duties
  • Planning the manoeuvre
  • PPE Requirements
  • Recognised signals
  • Regulations
  • Responsibilities
  • Risk assessment of manoeuvring task
  • Site limitation

Continue Reading No Comments

Overhead Gantry Crane Training Courses

overhead-gantry-crane-training

  • Overhead Gantry Crane Training Courses

    Overhead Gantry Crane Training Courses

Overhead Gantry Crane Training Courses Chelmsford

This training course is for delegates that would like to gain a nationally recognised operator qualification, enabling them to operate within the workplace an overhead gantry crane.

Some of the things you will learn include:

  • Gantry Crane Training Course Content
  • Basic operating
  • Slinging & Signalling
  • Checks
  • Load handling with various slings
  • Advanced Lifting exercise

Continue Reading No Comments

Working at Height Training Courses

working-at-height-training-courses-chelmsford-essex

  • Working at Height Training Courses

    Working at Height Training Courses

Working at Height Training Courses Chelmsford

We offer a comprehensive range of working at height related training courses for operatives, supervisors and managers.

The work at height regulations, apply to all people who work at a height where there is a risk of a fall liable to cause personal injury.

The regulations place duties on employers, the self-employed, and any person who controls the work of others for example facilities managers, building owners, or householders who may contract others to work at height.

Continue Reading No Comments

Mobile Elevated Training Courses

cable avoidance training courses chelmsford essex

  • Mobile Elevated Work Platforms Training Courses

    Mobile Elevated Work Platforms Training Courses

Mobile Elevated Training Courses Chelmsford

To instruct an operator to prepare and operate various types of Mobile Elevating Work Platforms (MEWP).

This includes scissor lifts and personnel lifts that do not have outriggers so that you can drive the machine while elevated.

Continue Reading No Comments

Facefit Testing Training Courses

face-fit-testing-training-courses-chelmsford-essex

  • Facefit Testing Training Courses

    Facefit Testing Training Courses

Facefit Testing Training Courses Chelmsford

To provide delegates with the knowledge and practical skills required to carry out Face Fit testing to ensure correct fitting of respiratory equipment.

For those who are responsible for providing respiratory protective equipment to their employees are required to show documentary evidence that the respiratory protective equipment (RPE) fits the wearer. By subjecting each wearer to a face fit test you can be sure your organisation is fulfilling Health Service Executive (HSE) requirements.

This course provides delegates with the knowledge and competency required to perform face fit testing to ensure the correct fitting of suitable respiratory protection equipment (RPE) using qualitative filtering face piece (FFP) or half masks and/or quantitative tight fitting respirators testing methods.

Some of the things you will learn include:

  • Introduction to face fit testing requirements
  • RPE selection & correct use
  • Record keeping
  • Correct disposal of RPE
  • Demonstration of quantitative techniques
  • Exam and practical test

Continue Reading No Comments

Asbestos Awareness Training Courses

asbetos-awareness-training-courses-chelmsford-essex

  • Asbestos Awareness Training Courses

    Asbestos Awareness Training Courses

Asbestos Awareness Training Courses Chelmsford

 

It is a legal requirement that everyone who may come across asbestos in their day to day work has been provided with asbestos awareness training. If they work on asbestos they must have had appropriate training specific to the tasks they will undertake.

Asbestos awareness training should be given to employees whose work could disturb the fabric of a building and expose them to asbestos or who supervise or influence the work.

If you have no intention of removing asbestos but work on buildings built or refurbished before the year 2000, asbestos could be present. You will need awareness training so you know how to avoid the risks

In particular, it should be given to those workers in the refurbishment, maintenance and allied trades where it is foreseeable that ACMs may become exposed during their work including:

  • Architects, building surveyors and other such professionals
  • Construction workers
  • Computer and data installers
  • Demolition workers
  • Electricians
  • Fire and burglar alarm installers
  • Gas fitters
  • General maintenance staff
  • Heating and ventilation engineers
  • Joiners
  • Painters and decorators
  • Plasterers
  • Plumbers
  • Roofers
  • Shop fitters
  • Telecommunication engineers

 

Continue Reading No Comments

Forklift Truck Training Courses

cable avoidance training courses chelmsford essex

  • Fire Marshal Training Courses

    Fire Marshal Training Courses

Forklift Truck Training Courses Chelmsford

Forklift Training Courses providing learners with the skills and knowledge to correctly, safely and legally operate a range of Fork Trucks in the workplace.

For any employer or operator looking for effective workplace transport training one of the first questions is always ‘is it suitable?’ RTITB accreditation takes the guesswork and risk out of workplace transport training for employers and operators.

Train to be Safe can cater for all workforces, private individuals and corporate clients including novices, experienced, and un-certified operators, as well as providing conversion certifications.

The theory section of the courses cover the necessary legislation, the general principles of lifting and the operator’s code of conduct.

This lasts up to 5 hours and is normally delivered in a classroom format. The duration of the practical training will depend on the experience and number of learners. Each learner will spend a large amount of time on the forklift gaining experience and practicing skills.

The test consists of a theory test, pre-use check and a practical test of basic operating skills. By the end of the course the successful learners will have a detailed understanding of vehicle maintenance operations and the roles and responsibilities of Reach Truck and/or Counter Balance forklift drivers, including their legal responsibilities and the legislation affecting use.

We offer the full range of RTITB Training Courses as open public course at one of our training centres or alternatively, subject to facilities, the courses can be delivered at your offices or site.

Continue Reading No Comments

Slinger Signaller Training Courses

face-fit-testing-training-courses-chelmsford-essex

  • Slinger Signaller Training Courses

    Slinger Signaller Training Courses

Slinger Signaller Training Courses Chelmsford

This course aims to provide delegates with thorough practical and theory training in operating as a Slinger/Signaller, in order to enable the delegate to pass the CPCS Theory and Practical Tests.

Describe the nature of the sector of industry and their roles and responsibilities as a Slinger/Signaller.

Some of the things you will learn include:

  • Name and explain the purpose of differing types of lifting equipment and lifting accessories, basic construction, uses and applications, characteristics and terminology
  • Confirm with Manufacturer’s requirements as per the technical data, other types of information source and the relevant regulations and legislation
  • Interpret and extract information on all relevant documentation
  • Undertake all checks on non-specialist lifting accessories and identify non- serviceable items
  • Explain procedures for placing non-serviceable items out of service
  • Identify centres of gravity and estimate weights of loads
  • Prepare and ready the area of operation
  • Choose the relevant lifting accessory for a given load
  • Explain action required for hazards, underground and overhead services
  • Secure various types of load to a lifting hook using the relevant lifting accessory and procedures
  • Ensure load balance, security and integrity
  • Accurately place loads
  • Arrange, use and comply with communication procedures
  • Maintain safe working conditions
  • Carry out shut down and securing procedures

Continue Reading No Comments

Cable Avoidance Training Courses

cable avoidance training courses chelmsford essex

  • Cable Avoidance Training Courses

    Cable Avoidance Training Courses

Cable Avoidance Training Courses Chelmsford

This training course is designed to address the needs of those who need to detect and trace underground services in Chelmsford Essex.

The Cable Avoidance Tools training course (CAT) instructs delegates on how to detect and trace underground services and use cable avoidance tools appropriately and in line with recognised safe working practices.

Some of the things you will learn include:

  • CAT3, Genny 3, CAT4, RD400, RD8000, TX10
  • Detecting and tracing underground services
  • Regulations and safe working practices
  • How to use cable avoidance tools
  • How to carry out a function test
  • Identification of cable avoidance tools and signal generators
  • Reasons for using locators
  • Cable avoidance hazards
  • CAT limitations

Continue Reading No Comments

Safety Training Chelmsford